I have previously owned three dedicated summer jackets but never been really happy with any of them. The first jacket was a $99 clearance bin item made by Dryrider that I purchased 10+ years ago. This was a very light weight item with minimal protection but maximum cooling. I expected to use it for a limited time until I found something better however I still have this jacket and was using it on the very hottest days each year until this summer.

The second jacket I purchased was a Cortech item that was supposed to do it all. The base was a combination of mesh, textile and leather with lots of armor. To this you could zip in wind and water proof liner and thermal liner. Instead of doing it all it really did not work well for anything. Heavier than my full leather jacket it was simply too heavy and hot to wear on a summer day and with the liners in I remained cold on a winter day so I actually threw it away recently.

In the USA caught out by the 40+ heat I purchased a full mesh jacket made by River Road and this was perhaps the best of the three but it was very light weight with simple foam padded armor and like the Dryrider would offer less protection than a regular jacket in a crash.

This summer I decided to finally get a summer jacket that worked but with good protection. I have been very happy with the BMW pants I have so I decided to investigate their jackets.

PB071614

The BMW Airflow 4 Jacket is actually very expensive (in Australia) if you were looking at it full retail price. I happened to walk in to my local dealer when they had a 40% off clearance and even at a reduced price it was at the upper envelope of what I would be prepared to pay. Fortunately with eBay, Amazon, Google shopping etc you can seek out items worldwide and hopefully avoid paying full retail. Or if travelling then email a BMW dealer where you are going about price as retail items in Australia are marked up huge amounts compared to overseas.

Ok with that out of the way I can say the jacket itself is excellent. I purchased it a couple of months ago but so bad has the weather been that it has taken two months to get two solid riding days completed. Instead of open weave the jacket has sturdy construction, full complement of BMW’s armor and uses ventilation panels at specific locations. I was at first a bit sceptical about the ability of the panels to flow enough air but reviews seemed good so I decided to try and indeed the jacket works very well. The front and rear panels flow air in and along and around your arms and body and back out the rear panels to cool you effectively without resorting to a open weave type construction. An added feature is the jacket is a pale sand colour which does not hold heat like a black item and last weekend despite being a summer day the jacket did not get that heat build up as much as black does.

PB251622

I don’t want you to think I said this was good because of the brand as I actually do not like the brand itself per se as I find like Harley, BMW has too much elitism attached to it however their clothing line seems to be quite good albeit super expensive. If full price I would never buy as can buy quality brands like Alpinestars for much less however on sale it represents reasonable value.

Update 2014. Ok well I find the jacket on a fairing bike is not as cool as the mesh type jacket I have for airflow but it really works well on naked bikes. Over all the colour seems to really work to no absorb heat and when you think of it black is a stupid colour for a summer jacket (or helmet) 

Update 2. Still have this jacket 2019, the build quality is so good I suspect it will last me forever. Now I am no longer in Australia I don’t have much need for summer jackets as that is monsoon here but I think this is fine jacket which I will be using now for my rides in SE Asia.

5 Comments

  1. its niche blog, i like this blog..thank's

  2. thanks. anyone can tell me which brand is the helmet in the picture?

  3. Thanks for the review.
    I'm thinking of buying the bmw airflow jacket and pants for an upcoming tour from Sydney to Tasmsmian in Jan. On a naked bike with smallish fairing, sport screen purposely installed for this trip.
    I'm expecting some hot weather around Bright, Vic highlighands, MLB, etc but maybe cooler temps around Tassie.
    My question is how do you keep warm in early mornings and cooler days with the airflow gear?

    • Hi Brendan, the BMW jacket has no liners at all which did not concern me living in the tropics but where you are going it may not be up to the job.

      Riding in Thailand early in year the mornings can be cool and there I take a thin spray jacket that I wear underneath to stop the wind. That might work for you, like a sports windbreaker underneath.

      I do not use mesh pants. I have the BMW City pants and these have the protection woven into the cotton rather than panels of kevlar. They also have a special inner mesh lining that helps circulate air. Whilst sold as urban riding wear I followed a tough ride report across Angola and they took everything thrown at them.

Leave a Reply to adam Cancel

Your email address will not be published. Required fields are marked *